Description
Introducing the Gen3 FermZilla Tr-Conical. Now with 3 Inch Tri-Clover ferrule molded into the tank and redesigned tri-clover dump valve. This unit was born from customer feedback we received on the Gen2 Model. No more complicated dump valve designs here, just simplicity. Brew with confidence on the new Tri-Clover FermZilla Range.
This particular kit is a one-click option for those who want to be able to brew under pressure.
This is a very good starting point for those who are just getting into pressurisable fermenters and want to know what we would recommend to use with them. Pressure fermentation opens up a world of possibilites for the homebrewer wanting to take their beers to the next level. If you are kegging then the ability to do a closed pressure transfer straight into a keg is worth the cost of entry!
We have a great breakdown about the benefits of pressure fermentation here, and a guide to closed transfer here.
The new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyone’s budget. With the FermZilla you have many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.
This is an incredible product at an extremely attractive price point in all the different sizes and models.
Instructions:
To download the instruction sheet for this product click on the link below:
FermZilla 27L – Tri-Conical PDF Instruction Manual
Dimensions:To download the dimensioned drawings for this product click on the link below:
FermZilla 27L Tri-Conical Dimensioned Drawing
Warnings:
Please read the instructions thoroughly before use. The current version can be found in the ‘instructions’ tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.
Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.
Do not expose to temperatures exceeding 35°C and pressure ferment past 5psi at these temperatures.
Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof before you fill the fermenter every time. To do this. Fill your FermZilla up with some water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads by tipping it upside down, in all directions where there are risks of leakage.
Reviews
There are no reviews yet.